72" V60 Standard Flow Snow Blower 18 GPM Max
Manufactured: 10/7/16
*Before each use and after every 10 hours of operation
• Grease bearing (1 fitting).
• Apply thin layer of grease to top and bottom of spout ring (see Item #40). This will allow the spout to rotate more freely.
• Make sure all safety labels are in place, look in this manual for locations.
• Check for loose, worn, or missing parts, repair or replace as needed.
• Remove any foreign debris such as string, wire, etc. that may have wrapped around the auger and/or fan.
• Inspect motors, manifold, hydraulic fittings, and hoses for leaks and damage. Replace as needed. Make sure machine is shut off and hydraulic pressure is relieved before checking for leaks. Never use hands to check for high pressure hydraulic leaks.
• The pressure relief valves require no maintenance. The valves are pre-set and require no adjustment. Changing settings may cause damage to the motors. Please call Virnig Mfg. Inc. with any questions or problems regarding the pressure relief valves.
• Contact your dealer for any required replacement parts.
2019-03-09 - Purchased new